水溝蓋板是用在人行道、車行道、庭院或建筑物的地面作為水溝、管線溝、地下通道、風井、采光井、檢查井等的蓋板。因施工場地的原因，需要對水溝蓋板過長不符合鋪設要求，需要切割機進行切割，特制定以下技術要求：

1、指定專人在現場檢查和監督。

2、切割機工作地點附近10內范圍內，應是不燃性材料建筑，必須配備兩個專業滅火器。并應有供水管路，設專人負責噴水。

3、在井下進行切割時，必須在下方使用鐵板接受火星。

4、水溝蓋板切割標準要與水溝的寬窄相符合，應與水溝邊緣對 齊為宜。

5、切割作業完畢后，并設專人現場監護1h，確無異常后才能撤離現場。

掌握以上關于水溝蓋板的知識，在以后的工作中你就是專家。

Floor drain cover is used in sidewalks, driveway, patio or buildings as cover ditch, pipeline trenches, underground passage, air shaft, light wells, inspection wells. By reason of the construction site, the need for long drain cover does not meet the requirements laid requires cutting machine for cutting, formulated the following technical requirements:

1, the designated person in the on-site inspection and supervision.

2, within the vicinity of the cutting machine 10 within the scope of the work place should be non-flammable building materials, must be equipped with two professional fire extinguisher. And should the water supply pipeline, the person responsible for setting spray.

3, in the underground for cutting, you must use the iron beneath Mars accepted.

4, the drain cover standard cutting width to be consistent with the ditch should be aligned with the edge of the ditch is appropriate.

5, after the cutting operation is completed, and let someone live monitoring 1h, in order to ensure that no abnormal evacuated after.

Grasp more knowledge about the gutter cover, after work you're the expert.